Loading ...
Loading ...
Loading ...
ENG - 11
NOTES
All the Sound Tower models can connect in Group Play mode.
When “HOST” Sound Tower connects to a Samsung TV, the Group play mode will automatically
disconnect.
Environmental conditions or other factors with connected devices may have an effect on playback
quality.
If the light bar blinks pink and the speaker outputs a beeping sound, an error has occurred in the
Group Play
The ADD STEREO button and PAIRING button on the SUB Sound Tower systems are not available
while in wireless Group Play mode.
The ADD STEREO button on the HOST Sound Tower is not available while in wireless Group Play
mode.
Bluetooth devices can search and connect with the HOST Sound Tower only, but the SUB cannot
connect to any Bluetooth device.
If you power off or select any source other than BT on a SUB unit, the Group Play mode is
disconnected.
This product does not support aptX audio stream with Wireless Group Play mode.
If Wireless Group Play does not work properly:
– Turn off the system. Then, turn it back on again to activate the function.
Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Sound Tower main unit - e.g., microwaves, wireless LAN devices, etc.
When using the wireless Group Play mode function, sound from a connected microphone is only
output from the system to which the microphone is connected.
Disconnecting the wireless Group Play mode
1. Press and hold the GROUP PLAY button over 5 seconds (HOST or SUB).
The speaker will beep and the Group Play LED will turn off.
2. If you select any source other than BT on the SUB units or turn off the HOST Sound Tower, the
Group Play mode is disconnected.
LED Indications
LED STATE Description
Green
Blink Waiting for a wireless Group Play connection.
Solid The wireless Group Play connection was successful.
Red Solid There is an error with the wireless Group Play connection.
Loading ...
Loading ...
Loading ...