Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
50
Changing the door hinging
The refrigeration appliance is supplied
with hinges on the right. If left-hand
hinging is required, the hinges must be
changed.
Place a suitable cover on the floor in
front of the appliance to protect the
appliance door and your floor from
damage.
If a door seal is damaged the appli-
ance door will not close properly and
cooling performance will be reduced.
As a result, condensate will build up
in the interior cabinet and this can
cause a build-up of ice.
Do not damage the door seal.
Close the appliance door.
Unscrew the bottom hinge
bracket, and take it off.
Take the appliance door off down-
wards.
Pull the hinge pin out of the hinge
bracket, and screw it into the
second hole in the hinge bracket.
(The hinge pin can be removed and
screwed back in using the hexagon
key supplied.)
Remove cover and use it to cover
the empty holes on the opposite side.
Unscrew the upper hinge pin with
the hexagon key supplied and refit it
on the opposite side. Don’t forget to
use the washer.
Loading ...
Loading ...
Loading ...