Loading ...
Loading ...
Loading ...
Cleaning and care
35
All surfaces are susceptible to
scratching. Contact with unsuitable
cleaning agents can alter or discol-
our the surfaces.
See the information on “Cleaning
agents” at the beginning of this sec-
tion.
Clean the surfaces with a clean
sponge and a solution of warm water
and washing-up liquid. A clean, damp
microfibre cloth without cleaning
agent can also be used.
After cleaning, wipe with clean water
and dry with a soft cloth.
Cleaning the door seal
Risk of damage as a result of in-
correct cleaning.
If you treat the door seal with oils or
grease, it can become porous.
Do not use any oils or grease on the
door seal.
The door seal should be cleaned reg-
ularly with clean water and then
wiped dry with a cloth.
Cleaning the ventilation gaps
A build-up of dust will increase the en-
ergy consumption of the appliance.
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele vacuum cleaner dusting
brush, for example).
Cleaning the compressor and
metal grille at the back of the
appliance
A build-up of dust will increase the en-
ergy consumption of the appliance.
Risk of damage as a result of in-
correct cleaning.
Cables and other components can
get broken off, bent or damaged.
Carefully clean the compressor and
metal grille.
The compressor and metal grille at the
back of the refrigeration appliance (heat
exchanger) should be dusted at least
once a year.
After cleaning
Close the appliance door.
Reconnect to the mains and switch
the appliance back on.
Switch on the Super freeze function
so that the appliance can cool down
quickly.
Once the temperature in the freezer is
sufficiently low, place the food back
in the freezer drawers and put them
back in the freezer.
Switch the Super freeze function off.
Loading ...
Loading ...
Loading ...