Loading ...
Loading ...
Loading ...
25
2
3
1
Installation Guide
Series: All
www.fhiaba.com · www.thevettagroup.com
EnglishFrançais
Installation
For a built-in installation, to close gaps between the appliance and
the adjacent cabinets, special side proÀ les and aluminum covering
frames are provided.
Operate as follows:
Push the appliance into the installation niche
1
.
If the unit is to be installed inside a niche or within an enclosed struc-
ture, it is necessary to design a ventilation shaft at the back of the ni-
che to assure proper ventilation at the back of the unit. A 5 mm (1/4”)
gap is sufÀ cient to prevent overheating. Always mount front panels on
door and drawer before pushing the unit into its À nal position inside the
niche or structure.
Secure the appliance to the adjacent cabinets by À xing to these the
side proÀ les previously mounted on the appliance
2
.
To make this operation easier keep the door and the drawer open.
Check the levelling of the appliance, adjusting its feet and wheels
to correct it.
Mount the proÀ les the covering frames: À rst insert them laterally and
then push À rmly until a “click” is heard
3
.
Built-in installation single appliance
IMPORTANT: The following instruction for installation apply to all Fhiaba models.
Loading ...
Loading ...
Loading ...