Loading ...
Loading ...
Loading ...
60cm - ICC6GE3 & 90cm - CC96GB Ceramic Cooktops Page 24
Installation - electrical connection
The cooktop MUST BE installed by qualified personnel or
technicians. Please never conduct the operation by yourself.
• The cooktop shall not be mounted close to cooling equipment, dishwashers
and rotary dryers. There will be a dedicated power source for the cooktop.
• The cooktop shall be installed ith suffcient ventilation to ensure its reliability.
• The wall, work surface, adjoining cupboards, doors and adhesives shall be
able to withstand high heat generated by the cooktop.
• For cleaning, steam cleaners are not to be used.
• This ceramic cooktop can be connected only to a supply with system
impedance no more than 0.427 ohm. In case necessary, please consult your
supply authority for system impedance information.
• The cable must not be bent or compressed. If the cable is damaged or needs
replacing, this should be done only by a qualied after-sales technician. Regular
checks on the cable by a qualied technician is recommended.
• If the appliance is being connected directly to the mains supply, an omnipolar
circuit breaker must be installed with a minimum gap of 3mm between the
contacts.
• The installer must ensure that the correct electrical connection has been made
and that it complies with safety regulations.
Connecting the cooktop to the mains power supply
The power supply should be connected in compliance with the relevant local
standards to a single-pole circuit breaker. The method of connection is shown
below.
Loading ...