Loading ...
Loading ...
Loading ...
Page 23 60cm - ICC6GE3 & 90cm - CC96GB Ceramic Cooktops
Installation - fixing cooktop to work surface
Fitting moisture / dirt seal
• The cooktop should be placed on a stable, smooth surface (use the
packaging). Fit moisture / dirt seal to underside edge of the cooktop. See
below illuistration. When cooktop afxed to work surface this seal will reduce
risk of moisture and dirt from getting underneath the edge of the ceramic glass
surface.
Locating and fitting the fixing brackets and cooktop to work surface
• Whilst the cooktop is upside down the xing brackets should be put into
place
• Fit the xing brackets to the base of the cooktop in the four corner locations.
The brackets can be reversed base on the thickness of the work surface.
• Place cooktop into pre-cut housing in work surface.
• Fix the cooktop to the work surface by screwing the four brackets on the
bottom of cooktop (see picture) after installation.
Bracket positions Fixing of brackets for various work surface thicknesses
Loading ...
Loading ...