Loading ...
Loading ...
Loading ...
4
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT INSTRUCTIONS FOR
UNPACKING AND INSTALLATION
Read and follow the below instructions and
precautions for unpacking, installing, and
servicing your appliance:
IMPORTANT
• Remove all tape and packaging before using the
appliance. Destroy the carton and plastic bags after
unpacking the appliance. Never allow children to play
with packaging material. Do not remove the wiring
label and other literature attached to the appliance. Do
not remove model/serial number plate.
• Cold temperatures can damage the electronic control.
Whenusingthisapplianceforthersttime,orwhen
the appliance has not been used for an extended
period of time, be sure the appliance has been in
temperatures above 32ºF (0ºC) for at least 3 hours
before turning on the power to the appliance.
• Never modify or alter the construction of the appliance
by removing the leveling legs, panels, wire covers,
anti-tip brackets/screws, or any other part of the
appliance.
• Besuretohaveanappropriatefoam-typere
extinguisher available, visible, and easily accessible
located near the appliance.
GROUNDED INSTRUCTIONS
• Avoid re hazard or electrical shock. Failure to
follow this warning may cause serious injury,
re, or death
• Avoid re hazard or electrical shock. Do not
use an adapter plug, use an extension cord,
or remove grounding prong from the power
cord. Failure to follow this warning may cause
serious injury, re, or death.
WARNING
Proper Installation—Be sure your appliance is properly
installedandgroundedbyaqualiedtechnician.Inthe
United States, install in accordance with the National Fuel
Gas Code ANSI Z223.1/NPFA No. 54, latest edition and
National Electrical Code NFPA No. 70 latest edition, and
local electrical code requirements. In Canada, install in
accordance with CAN/CGA B149.1 and CAN/CGA B149.2
and CSA Standard C22.1, Canadian Electrical code, Part
1-latest editions and local electrical code requirements.
Install only per installation instructions provided in the
literature package for this appliance.
• For personal safety, this appliance must be properly
grounded. For maximum safety, the power cord
must be securely connected to an electrical outlet or
junction box that is the correct voltage, is correctly
polarized and properly grounded, and protected by a
circuit breaker in accordance with local codes.
• It is the personal responsibility of the consumer to
have the appropriate outlet or junction box with the
correct, properly grounded wall receptacle installed
byaqualiedelectrician.Itistheresponsibilityand
obligationoftheconsumertocontactaqualied
installer to assure that the electrical installation is
adequate and is in conformance with all local codes
and ordinances.
This appliance is equipped with a 4-prong grounding plug
for your protection against shock hazard and should be
plugged directly into a properly grounded receptacle. Do
not cut or remove the grounding prong from this plug.
See the installation instructions packaged with this
appliance for complete installation and grounding
instructions.
240V grounded
wall receptacle
Power supply
cord with 4-prong
grounding plug
Loading ...
Loading ...
Loading ...