Loading ...
Loading ...
Loading ...
29
SETTING OVEN CONTROLS
Probe (cont’d)
“Probe Too Hot” message:
If the message “Prob” ... “Too”... “Hot”...ashesinthe
display, the probe sensor temperature has exceeded 250°F
(121°C). If the probe is not removed, this message may
continue until the sensor reaches 300°F (149°C) or higher,
at which time the oven will turn OFF and display “Prob
ERR” message.
This message may occur if the probe sensor is exposed to
direct oven heat or the food internal temperature is over
250°F (121°C). Be sure the probe sensor is fully inserted
into food. If the food is done, press cancel and remove
food and probe from the oven.
If the error message “Prob ERR” displays, check to
be sure the probe connector is fully inserted into the
receptacle. If the probe is fully inserted in the receptacle
and the error message continues, the probe may need to
be replaced.
If “Prob ERR” displays, the oven control will deactivate all
other features until corrected or the probe is removed. If
the error message continues, remove the probe from the
receptacle and oven.
Probe error message:
Loading ...
Loading ...
Loading ...