Blaze BLZGRIDDLELTENG 30 Inch BuiltIn Gas Griddle with 495 S

User Manual - Page 26

For BLZGRIDDLELTENG.

PDF File Manual, 36 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
Blaze Outdoor Products Instructional Book
Page | 26
before attempting to light
it again. Repeat the procedure or try the manual lighting procedure below.
6.
If the burner does not light after several attempts, immediately close all gas valves and consult an
authorized service technician.
7.
Upon successful lighting, repeat the process on the other burner.
8.
To shut off the burners, rotate the knob and turn to OFF. It is normal to hear a popping sound when the
burners are turned off.
9.
Close the valve at the gas supply.
Manually Lighting the Main Burners
WARNING: Do not use standard size matches or cigarette lighters to perform match-lighting procedures. Serious
burns can occur and lighters can explode.
1. Remove the Protective Stainless cover from the Griddle Plate
2. If you have just attempted to light the burner, allow five minutes for any accumulated gas to dissipate. Use
caution by standing as far away from the burners as possible. Do not put your hands, arms, head or any
body parts close to the griddle when lighting.
3. Locate the lighting tubes on the front of the griddle plate in the grease drain area. The lighting tubes
protrude approximately ½” from the wall in the drain area and have a hole to the left and right which are
used to confirm ignition of the burners. (you will have this same configuration on both the left and right
hand side for each of the two burners.)
4. Hold your open flame to the front of the Lighting Tube.
5. Push in and turn the control knob to HIGH. Listen for the sound of gas igniting and look for a flame through
the circular openings in the front of the griddle plate.
6. If the burner does not light after five seconds (you will see flames from the two observation openings in the
front of the griddle plate), turn the control knobs to the OFF position.
7. Wait five minutes until the gas clears before attempting to light it again.
8. If the burner does no light after several attempts, immediately close all gas valves and consult a licensed
gas professional.
Loading ...
Loading ...
Loading ...