Loading ...
Loading ...
Loading ...
Cleaning and servicing en
29
1. Prepare the descaling solution.
‒ Add 2teaspoons of citric acid
to warm water at 50°C.
2. Slowly pour the descaling solution
into the plant tray.
Maximum capacity has been
reached when the light unit flashes
white twice.
3. Touch the touch button for
15seconds until the light unit
lights up green.
→Fig.
25
a The pump will run for around
3minutes.
4. If not all deposits have dissolved,
leave the descaling solution to
work for a few more hours and
then start the pump again.
Cleaning the device
After descaling, clean all parts thor-
oughly.
1. Remove the light unit and the
height modules.
→Fig.
26
2. Remove the plant tray , the wa-
tering tray and the anti-spill
ring .
→Fig.
27
3. Remove the water bowl.
→Fig.
28
4. Turn the pump housing anticlock-
wise and remove.
→Fig.
29
5. Take out the pump impeller.
→Fig.
30
6. Clean all parts as indicated in the
cleaning overview.
7. After drying re-assemble all parts
in reverse order.
Note:When inserting the pump im-
peller, check that there are no
residues on or underneath the im-
peller. The pump impeller must turn
easily.
Overview of cleaning
Here you will find a overview of the
best way to clean the individual com-
ponents.
→Fig.
31
Loading ...
Loading ...
Loading ...