OWNER'S MANUAL - Page 10

For VBXR1090DAWW. Also, The document are for others Hotpoint models: VVSR1070*, VBXR1090*, VBSR31O0*, VWSR4150*, VLXR1020*

Loading ...
Loading ...
Loading ...
Before you call for service...
_ roubleshooting -tips
Save time and money! Review the charts on the following pages,
or vis# www.Hotpoint.com. Youmay not need to call for service.
WATER Possible Causes What To Do
Too many suds Type of detergeut Switch to a lower sudsiug detergeut bI'aud aud fi)llow
iustrucfious ou package.
Very soft water T_w less detergent.
Too much detergent Measme your detergent carefllll> Use less soap if you
have soft water; a smaller load, or a lightly soiled load.
Water leaks Fall hoses or dxaJn hose is Make sure hose connections are fight at fimcets and
improperly cmmected rubber washe_ are installed. Make sure end of drain
hose is correctly inse_led in and secm'ed to drain fi_cilitv:
Household dacaJn may Check household i)lmnbing. You may need to call
be dogged a l)lumbe_:
Constaalt water pressure Tighten hoses at the fimcets aud turu the water off alter
to the fill hoses at the each use.
water source Check condition of the fill hoses; they should be
replaced eve_T 5 vem_.
Using too much detergent Use less detergent. Use less soap if xou haxe soft watei,
in washer a smaller load, or a lightly soiled load.
Water temperature Cooler water temperatures New la tm(h T detergents have been flnm ulated to _x)rk
seems incorrect provide hupmved energy with cooler water temperatm'es without aflectiug wash
efficiency l)e_fbmmnce.
Control is not set properly Check water temperatm'e control (on some models) or
Cycle knob and a(!just.
Water supply is tttnaed off Tm'n both hot and cold fimcets rifle on and make sm'e
or improperly commcted hoses are comlected to correct fimcets.
Water valve screel_s axe Wtli'/l ()1']'tile x_ter SOtlrce alld relilOVe the x_;ttei"
stopped up c(mnection hoses fl'om tile upper back of the _slle_-
Use a brush or toofl_pick to clean the screens in fl_e
machine. Reconnect fl_e hoses and ttlri1 fl_e _ter back on,
House water heater is Make sure house water heater is delivering water at
not set properly 120° F-140°F (48 °C-60°C).
Water won't drain Drain hose is kinked or Straighten drain hose and make sure washer is not
improperly cmmected ,sittim,_ on it.
" Top of drain outlet should be less than 8 It. (2.5 m)
above floor.
10
Loading ...
Loading ...
Loading ...