Loading ...
Loading ...
Loading ...
17
Tab
Strain Relief
A
B
3. Insert a power cord into the strain relief. Take care to ensure that the wire
insulation of the power cord is inside the strain relief.
4. Connect power cord wires following Part A for a 4-wire power cord
connection or Part B for a 3-wire power cord connection.
4-wire (recommended) if your home has a 4-wire receptacle (NEMA
14-30 type SRDT or ST):
3-wire (if 4-wire is not available) if your home has a 3-wire receptacle
(NEMA 10-30 type SRDT):
CAUTION: A 4-conductor cord shall be used when the appliance
is installed in a location where grounding through the neutral
conductor is prohibited. Grounding through the neutral conductor is
prohibited for (1) new branch-circuit installations, (2) mobile homes,
(3) recreational vehicles, and (4) areas where local codes prohibit
grounding through the neutral conductors.
5. Tighten strain relief screws.
6. Be sure that none of the wires are touching the dryer drum inside the dryer
cabinet.
7. Reinstall the terminal block cover.
PART A - 4-WIRE POWER CORD
A
B
C
F
E
G
D
Ground Screw (Green)
Terminal Block Screw
eriW repmuJ dnuorG-lartueN
(Green)
Power Cord Ground Wire (Green)
Power Cord Neutral Wire (White)
;deR enO( seriW eniL droC rewoP
One Black)
Power Cord
Loading ...
Loading ...
Loading ...