HLTD500ACW User Manual

Loading ...

STEP BY STEP INSTRUCTIONS

INSTALLING YOUR DRYER

We recommend that your new dryer be installed by a quali ed appliance technician.

If you feel that you have the skills to install the dryer, please read the installation

instructions thoroughly before installing.

CAUTION: If, after completing these steps, you are unsure that the dryer is properly

installed, contact a quali ed appliance technician.

STEP 1 - UNPACK THE DRYER

1. Remove all packing materials. This includes the foam base and all adhesive tape

holding the dryer accessories inside and outside.

2. Inspect and remove any remains of packing, tape or printed materials before

using the dryer.









STEP 2 - ATTACH A POWER CORD TO THE DRYER

(ELECTRIC DRYER - U.S. ONLY)

1. Remove the screw securing the terminal block access cover, located on the back

of the dryers upper corner.

Terminal Block Access Cover

Hole in Strain Relief Mounting

Bracket

Access Cover Screw







2. Insert a UL listed strain relief into the mounting bracket hole. Position the strain

relief so that one tab is pointing up and one tab is pointing down. Tighten the

strain relief screws just enough to hold the two halves together.

Loading ...

User Manual - Page 18