Loading ...
Loading ...
OPERATION AND MAINTENANCE MANUAL FOR
F0700 & F0705
FOR PROFESSIONAL USE ONLY
IMPORTANT SAFETY INFORMATION ENCLOSED.
READ AND UNDERSTAND THIS MANUAL BEFORE OPERATING THIS PRODUCT.
IT IS YOUR RESPONSIBILITY TO MAKE THIS SAFETY INFORMATION AVAILABLE TO
OTHERS THAT WILL OPERATE THIS PRODUCT.
FAILURE TO OBSERVE THE FOLLOWING WARNING COULD RESULT IN INJURY.
PLACING MACHINE IN SERVICE
Always install, operate, inspect and maintain this
product in accordance with all applicable standards and
regulations (local, state, country, federal, etc.).
Always use proper gauge cord with correct connections.
Be sure all cords are securely connected to the
recessed male plug.
Ensure an accessible emergency shutoff when your
machine is connected to power. Make others aware of
its location.
Do not use damaged, frayed, or deteriorated electrical
cords or connections.
Do not leave machines in operation unattended for over
4 hours without inspection.
Keep all electrical connections clear of water or other
liquid hazards.
Always turn off and unplug your machine before
performing any maintenance.
Do not operate the machine while flammable or volatile
liquids such as gasoline, diesel or jet fuel are present.
Failure to do so can result in explosion.
Keep work area clean, uncluttered and illuminated.
Do not remove any labels. Replace any damaged labels.
USING THE MACHINE
Always wear protection when operating or
performing maintenance.
Always use Personal Protective Equipment
appropriate to the work being performed. This may
include dust mask or other breathing apparatus,
safety glasses, ear plugs, gloves, apron, safety
shoes, hard hat and other equipment,
If applicable, prevent exposure and breathing of
harmful dust and particles:
Some dust created by power sanding,
sawing, and grinding, drilling, and other
construction activities contains chemicals
known to cause cancer, birth defects or
other reproductive harm. Some examples of
these chemicals are:
- Lead from lead based paints,
- Crystalline silica from bricks and
cement and other masonry
products, and
- Arsenic and chromium from
chemically treated lumber
Your risk from these exposures varies,
depending on how often you do this type of
work.
Keep others a safe distance from your work area, or
ensure they use appropriate Personal Protective
Equipment.
This machine is not designed for working in
explosive environments, including those caused by
fumes and dust, or near flammable materials.
Keep hands, loose clothing, long hair and jewelry
away from the machines blower assembly and “Air
Intake.”
To avoid accidental starting – ensure machine in
“off” position before connecting to power.
Do not carry or drag the machine by the cord.
Do not operate or maintain the machine under the
influence of medication, drugs, or alcohol.
Never us a damaged or malfunctioning machines,
Do not modify the machine, safety devices, or
accessories.
Do not use this machine for purposed other than
those recommended.
Only use accessories recommended by Novatek
Corp.
Whenever applicable, wear safety shoes, hard hat,
safety goggles, gloves, dust mask and any other
appropriate protective clothing in the work area.
Do no indulge in horseplay. Distraction can cause
accidents.
Use only proper cleaning solvents to clean parts.
Use only cleaning solvents which meet current
safety and health standards. Use cleaning solvents
in a well ventilated area.
Do clean machine any parts with diesel fuel or any
other petroleum distillates.
Do not operate the tool with broken or damaged
parts.
This tool is not designed for working in explosive
atmospheres.
NOTICE
WARNING
Loading ...
Loading ...
Loading ...