Loading ...
Loading ...
Loading ...
7
Blade Screw
Blade Washer
Blade Arm
Blade
ASSEMBLY INSTRUCTIONS
9. Raise the canopy, ensure the two mounting bracket
screws are aligned with the J-shaped slots in the canopy.
Then turn the canopy in a clockwise direction until the
mounting bracket screws are completely engaged in
the J-shaped slots. Install the two previously removed
mounting bracket screws in the round holes. Securely
tighten all mounting bracket screws.
10
9
Canopy
Round
Hole
Mounting Bracket Screw
J-shaped Slot
10. Partially insert three blade screws, along with the
blade washers, through the blade and into the blade arm.
Tighten each blade screw, starting with the one in the
middle. Repeat this step for the remaining blades and
blade arms.
11. Secure the blade arm to the underside of the motor
assembly using the ten motor screws removed in Step 3.
Secure each blade arm to motor before moving to the
next.
Note: The notch in the tter plate allows a Phillips
screwdriver access to motor screws.
Motor Screw
Blade Arm
Notch
Fitter Plate
11
12. Remove the three tter plate screws from the tter
plate. Then, connect the 6-pin connector from the tter
plate to the 6-pin connector from the light kit. Secure
the light kit to the tter plate using the three tter plate
screws.
6-pin
Connector
Light Kit
Fitter Plate
Fitter Plate
Screw
12
Loading ...
Loading ...
Loading ...