Loading ...
Loading ...
Loading ...
10
since there is one end slightly smaller than another end.
- Be sure to run the water hose sloping downward to let the water flow out smoothly. No kinks or
bent.
- Do not submerge the other end of the hose into the water.
- It is recommended to use a short hose. If the drain hose is too long, water may not drain
completely, which can lead to stagnant water and mildew build up inside the hose.
- When the continuous drain feature is not being used, remove the drain hose from the outlet.
7. Smart Functions
1) Auto Shut Off
When the bucket is full and/or the room humidity reaches the set point, the dehumidifier will stop
working automatically.
2) Wait 3 Minutes before Resuming Operation
To avoid any damage to the dehumidifier, the compressor will not start operation following a
complete cycle until after 3 minutes. The operation will automatically start after 3 minutes. For
example, when the dehumidifier has been turned on immediately after being turned off, the
compressor won't start until 3 minutes later. During the 3-minutes delay start time, you can see the
Mode icon (DH or DRY) flashing which means the compressor does not kick in. When the
compressor kicks in, you can feel the dehumidifier shakes a little and the Mode icon (DH or DRY)
turns to statically illuminate.
3) Auto Defrost
When the frost builds up on the evaporator coils, the compressor will cycle off and the fan will
continue to run until the frost disappears.
4) Auto-Restart
If the dehumidifier shuts off unexpectedly due to power being cut while it is running or in standby
mode, the dehumidifier will restart with the previous function setting (working mode, set humidity,
fan speed, and etc.) automatically when the power resumes.
Loading ...
Loading ...
Loading ...