Loading ...
Loading ...
Loading ...
page 8
9. Light Kit Assembly.
Remove 1 screw from motor plate on
underside of motor housing and
partially loosen the other 2 screws.
Align slotted holes in fitter plate with
loosened screws in motor plate,
allowing male plug from motor housing
to come through hole in middle of fitter
plate. Twist fitter plate to lock. Re-insert
screw that was just removed and
securely tighten all 3 screws with a
Phillips screwdriver.
Remove 3 screws from outer edge of
fitter plate.
Connect male plug from motor housing
to female plug from the light kit fitter,
matching up the colors on the female
plug with the colors on the male plug
for correct fit. Be sure that plugs
connect securely. Align holes in light kit
fitter with holes in fitter plate. Re-insert
screws that were previously removed
and tighten all 3 screws securely with a
Phillips screwdriver.
Remove finial, finial plate, hex nut, flat
washer and rubber washer from
threaded rod on light kit fitter.
["Light Kit Assembly" continued on
next page.]
motor
housing
light kit fitter
fitter plate
male plug
female plug
motor housing
motor
plate
male plug
fitter plate
rubber washer
flat washer
hex nut
finial plate
finial
threaded rod
Loading ...
Loading ...
Loading ...