Loading ...
Loading ...
Loading ...
Additional Program Option settings
Extra Rinse .1,+2
This feature is helpful for locations with very soft water or
to generally improve rinsing results. It allows up to 2
additional rinse cycles to be added to selected programs
and will increase program time.
Prewash Pw
For heavily soiled washing. Pour 1/3 of normal detergent
amount into pre-wash chamber 1and remaining 2/3 into
main wash chamber tt.
Speed Perfect --i_
For washing in a shorter time with a washing result
comparable to that of the standard program.
Note: Do not exceed the maximum load. ---> Program
selection table; Page 25
Cleaning and maintenance
Your washer is designed to give you many years of
service. Observe the following instructions to maintain
and protect your washer and keep it in top operating
condition.
• , WARNING
RISK OF ELECTRIC SHOCK HAZARD!
To avoid risk of electric shock always disconnect
the washer from the power outlet prior to cleaning.
Never clean the washer with a pressure washer.
Cleaning the housing and control panel
• , WARNING
RISK OF EXPLOSION!
To avoid risk of explosion never clean the washer
with flammable solvents.
As required, you may clean the washer housing and
control panel.
- use hot soapy water or a mild (non-abrasive) cleansing
agent.
- Dry with a soft towel.
- Remove residue immediately.
- Do not use high pressure spray.
Cleaning the drum
Metallic debris left in the drum can produce rust spots on
the drum. Never use steel wool to try to remove these.
Use a chlorine-free cleansing agent and follow the
manufacturer's instructions.
Descaling the washer
Provided that you use correct amounts of detergent with
your wash loads, descaling is not necessary. If descaling
the washer drum does become necessary, please follow
the descaling product manufacturer's instructions.
Small amounts of descaling agent can be used to
remove white spots on the washer drum caused by lime
or mineral deposits or small amounts of rust caused by
metal objects left in the drum.
NOTICE: Descaling agents contain acids which may
attack parts of the washing machine and may discolor
the laundry.
Cleaning the detergent dispenser tray
If there is a buildup of residual detergent or additives, or
if the softener compartment is not rinsed out well
enough, it may be helpful to clean the dispenser.
1. Open the detergent dispenser tray fully. Press down
on the drawer catch (1) and pull the tray (2) from the
washer housing.
2. Remove the insert (3) by grasping it and pulling it
upwards from the detergent dispenser tray.
3. Clean the insert and the detergent dispenser tray by
holding it under warm running water. Lightly wipe away
any remaining detergent residue.
4. Attach the insert and slide the detergent dispenser tray
back into place and close the tray securely.
Tip: Do not operate the washer without the detergent
dispenser tray in place. Always keep the tray completely
closed.
27
Loading ...
Loading ...
Loading ...