Loading ...
Loading ...
Loading ...
Hotwaterhose
Coldwaterhose
NOTICE: If any parts are missing please notify your
dealer immediately.
Set up on a pedestal with drawer
Pedestal item number: WMZ 20490
Mount washer on the pedestal according to the
instructions in the installation kit.
Installation checklist
Review the following list and check off each step as it is
completed during installation.
,/ Installation Step Page
If installing to a pedestal ---> Remove the trans-
(base), complete the base port bolts; Page 13
installation before removing
the transportation bolts
Completely remove all four ---> Remove the trans-
shipping bolts keeping the port bolts; Page 13
bolt and bushing assemblies
intact
Connect the water supply ---> Water
hose and drain hose connections; Page 13
Connect the electrical power ---> Electrical
connection; Page 15
Slide the washing machine
into its final location
Level the washing machine ---> Leveling the
(as low as possible) washer; Page 15
Before washing laundry, run ---> Before loading
the Drum Clean program your first load of
laundry; Page 19
Importance of installing on a solid, level
floor
Your new Bosch washing machine utilizes high spin
speeds to achieve superior water removal from your
laundry resulting in reduced drying time. It is important to
install your washing machine on a floor that will provide
firm support. This prevents the washer from experiencing
excess vibration during spinning that could cause the
washer to move or be noisy.
The installation surface must be solid and level in both
directions. Avoid installing your washer on soft surfaces
such as floors with carpet or foam backed covering
material.
If installing the washer on a wooden floor, observe the
following:
° install the washer in a corner for better support if
possible.
° if necessary, reinforce the floor by screwing a water
resistant wooden board to the floor (minimum of
1.18 in./30 mm thick).
12
Loading ...
Loading ...
Loading ...