Loading ...
Loading ...
Loading ...
Figure1
Care &
As soon as the control is set, the motor driven oven door lock will
begin to close automatically, Once the door has been locked the
"UPPER", "DOOR"and "LOCKED"indicator light wiii stop flashing and
remain on, Also, the oven icon will appear in the display (Figure 1),
Allow about 15 seconds for the oven door lock to close,
Note: if the optionaJ delay SeJf-CJean feature is needed, finish steps 6-9. if Setf-
CJean is started immediateJy skip the remaining steps and continue with "When the
SeJf-CJean cycle is completed".
Figure2
Figure3
Figure4
Figure 5
Figure6
A
6, Press (_ or _*), "UPPER"and "DELAY" wiii start flashing and "--:--"
will appear in the display (Figure 2),
7, Enter the desired start time using the number pads(_, (_, (_)
(Figure3),
8, Press {@, The display will return to the time of day (Figure 4),
8T_T
9, The control will start the self-cleaning at the set start time, for the
period of time previously selected (Figure 5),
When the Self-Cban Cycle is Compbted:
1, Three long beeps will be heard and "CLn" will disappear from the
display, "UPPER", "DOOR"and "LOCKED" will remain in the display
until the door is unlocked, The cooling fan will continue to run until the
oven has cooled down (Figure 6),
2, Once the oven has cooled down for l HOUR, and"UPPER", "DOOR"
and "LOCKED" are no longer displayed, the oven door can then be
opened,
1,
2_
Stopping or interruptinga Seif-Cbaning Cycb:
if it becomes necessary to stop or interrupt a self=cleaning cycle due to
excessive smoke in the oven:
Press@or@,
_N_t_L _NCEL
Once the oven has cooled down for approximately 1 HOUR and "UPPER", "DOOR"and
"LOCKED"are no longer displayed, the oven door can then be opened,
important Notes when using the Self=Clean Feature:
1, A Self=Clean cycle cannot be started if Oven Lockout feature is active,
2, When Self=Clean cycle is active on one oven, the other one cannot be used or set for a
Self=Clean cycle or any cooking,
3, if your clock is set for normal 12 hour display mode the delay Self=Clean cycle can
never be set to start more than 12 hours in advance, To set for a delayed Self=Cleaning
cycle 12=24 hours in advance see instructions to set the control for the 24 hour time of
day display mode,
Loading ...
Loading ...
Loading ...