Loading ...
Loading ...
Loading ...
GLD Products Orion Dartboard
Item 42-1036
81-800-225-7593
www.gldproducts.com
Create the Toe Line
Place a toe line 96" from the face of the board
for the throwing distance. Adhesive tape or
masking tape, 2' long by 2-1/2" wide, may be
used.
This dartboard is compatible with the Viper
LaserLite mini-laser throw line (not included),
an absolute essential for all dart players. No
need to tape a line to the ! oor; just plug the
LaserLite into your dartboard and you have a
crystal-clear throwing line that's there when
you need it and gone when you don't. Ordering
information is included on page 43.
GLD products also offers a Viper Throwing Line
and a Dart Mat for this purpose.
POWER INSTALLATION
The dartboard is designed to be powered by an AC to 5V DC, 1000 milliamp (minimum)
adapter, with the DC plug polarity con# gured as positive (+) outside, and negative (-)
center. To connect the adapter, plug the DC plug into the DC power jack on the dartboard
and the AC plug into an electrical outlet.
1. The board is not intended for children under the age of 9 years old.
2. The board must only be used with the recommended transformer.
3. The transformer is not a toy.
4. Disconnect the dartboard from the transformer before cleaning.
PROTECTIVE FILM
This electronic dartboard has a clear protective # lm over the entire display and button
area to prevent scratching during shipping. It is recommended that you remove this # lm for
easier reading of the display. To remove, simply lift edge, peel off and discard.
WARNING: Not for use by children without adult supervision.
Darts are not toys and may cause injury if used
improperly. Everyone must stand behind the dart
thrower.
Loading ...
Loading ...
Loading ...