Loading ...
Loading ...
Loading ...
OPERATIING INSTRUCTIONS
14
3
4
3. To make fan operational, install two 1.5V AAA batteries
(included). Replace the battery cover.
NOTE:
This remote control uses two 1.5V AAA batteries.
Replace batteries with the correct size and type of battery.
Clean the battery contacts and area inside the device
prior to installing new batteries. Ensure the batteries are
installed correctly with regard to the polarity ( + and -).
NOTE:
If not used for long periods of time, remove
battery to prevent damage to transmitter. Store the
remote control away from excessive heat and humidity.
4. Each transmitter of this remote control carries a unique
ID code to facilitate communication between paired
devices. The ID code is set by factory and is not user
changeable. However, you will be required to perform
an “ID code learning” process manually under these
circumstances.
•
If you have multiple fans installed within a close
proximity and want to control all fans using a same
remote transmitter.
NOTE:
Each fan requires its own receiver.
•
When your remote control is not responding (make
sure battery is not flat).
•
After you have replaced a faulty transmitter or receiver
with a new one.
Otherwise the remote control will not work. To perform
this process manually, follow steps below:
Press the “ LEARN” button for 5 seconds or more within
30 seconds after restoring power to the fan, the fan will
beep twice and the light will flash twice. This indicate the
code learning process have been completed.
Loading ...
Loading ...
Loading ...