Loading ...
Loading ...
Loading ...
21
Timer Feature
This feature allows you to program the
oven as a kitchen timer. It can also be used
to program a standing time after cooking is
completed and/or to program a delay start.
To Use as a Kitchen Timer:
Example: To count down 5 minutes.
1.
• Press Cooking Timer
once.
2.
• Set desired amount
of time using number
pads.
3.
• Press Start.
Time will count down
without oven
operatings.
To Set Stand Time:
Example: To cook at P6 power for 3
minutes, with stand time of
5 minutes.
1.
Press 5 times
• Enter the desired
Power level (see
page 13 for directions).
2.
• Set desired cooking
time using number
pads.
3.
• Press Cooking Timer
once.
4.
• Set desired amount
of Stand Time using
number pads.
5.
• Press Start.
Cooking will start.
After cooking, stand
time will count down
without oven
operating.
CAUTION:
If oven lamp is lit while using the
timer feature, the oven is incorrectly
programed. Stop oven immediately and
re-read instructions.
To Set Delay Start:
Example: To delay the start of cooking
for 5 minutes, and cook at
P6 power for 3 minutes.
1.
• Press Cooking Timer
once.
2.
• Enter desired amount
of delay time using
number pads.
3.
Press 5 times
• Enter the desired
Power level (see
page 13 for directions).
4.
• Set desired cooking
time using number
pads.
5.
• Press Start.
Delay time will
count down. Then
cooking will start.
NOTES:
1. When each stage fi nishes, a two-beep
signal sounds. At the end of the pro-
gram, the oven will beep fi ve times.
2. If the oven door is opened during Stand
Time, Kitchen Timer or Delay Time, the
time in the display will continue to count
down.
3. Stand time and Delay start cannot
be programmed before
inverter turbo
defrost, sensor or other auto features
.
This is to prevent the starting tempera-
ture of food from rising before defrosting
or cooking begins. A change in starting
temperature could cause inaccurate
results.
4. The maximum programmable time of
Standing Time, Kitchen Time or Delay
Time is up to 99 minutes and 99 se-
conds
F0003BP80AP_En.indd 21F0003BP80AP_En.indd 212015/1/6 15:28:352015/1/6 15:28:35
Loading ...
Loading ...
Loading ...