Loading ...
Loading ...
Loading ...
6
INSTALLATION INSTRUCTIONS
Before Using your Appliance
• Remove the exterior and interior packing.
• Check to be sure you have all of the following parts:
o 2 Refrigerator shelves
o 1 Vegetable crisper
o 1 Glass crisper cover
o 1 Freezer shelf
o 1 User Manual
• Before connecting the unit to the power source, let it stand upright for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
Installation of your Appliance
NOTE: Locate your appliance on a flat, sturdy surface capable of withstanding the weight of the unit
when it is fully loaded.
• This appliance is designed for free-standing installation.
• Locate the appliance away from direct sources of heat such as radiators, boilers, and direct
sunlight.
NOTE: It is not recommended to install the unit where the ambient temperature will drop below 60°F
(16°C) or rise above 90°F (32°C) in order for the compressor to maintain proper
temperatures. If locating the unit in a location where temperatures will drop below 50ºF, set
the freezer temperature control to the “COLDEST” setting to improve the overall
performance.
• Leave 5 inches (127mm) of space around the back and sides of the unit to allow proper air
circulation to cool the compressor and condenser.
• Select a location with enough space for the refrigerator doors to open easily.
• Allow clearance to the right, left, back, and top when installing. This will help reduce power
consumption and keep your energy bills lower.
CAUTION: It must be possible to disconnect the unit from the main power supply. Therefore, the
plug must be accessible after installation.
Loading ...
Loading ...
Loading ...