Loading ...
Loading ...
Loading ...
10
OPERATING YOUR APPLIANCE
Control Panels
Setting the Temperature Control
• Your refrigerator has one control for regulating the temperature, located on the back wall of the
refrigerator compartment, as well as a control knob in the freezer to balance the cold air
distribution between the two compartments.
• The temperature control in the refrigerator compartment will control the actual cooling cycle,
whereas the control knob in the freezer compartment will adjust the distribution of the cold air
between the freezer and the refrigerator compartments.
• The first time you turn the unit on:
1. Turn the temperature control knob to “COLDEST” in the freezer compartment and
“COLDEST” in the refrigerator compartment and run for at least 4 hours before placing foods
inside. This will ensure the freezer cabinet is thoroughly chilled and the refrigerator
compartment will be stabilized before food is placed.
2. Return the freezer control knob to the “Recommended” or COLDER position, and turn the
refrigerator control know to the “Recommended” or COLDER position.
• Adjust the temperature control to the setting that best suits your needs. The “Recommended”
setting in the refrigerator compartment and “COLDER” in the freezer compartment will distribute
the cold air equally between both compartments which should be appropriate for home or office
refrigerator use.
• If you, at any time, want to distribute a larger amount of cold air to the freezer for example is a
large amount of food has been added to the freezer, simply move the controller to the
“COLDEST” position until the desired temperature has been attained, then return the controller
to the “Recommended” position.
• If you at any time want to distribute a larger amount of cold air to the refrigerator section, for
example to quickly cool down if a large amount of fresh food has been added, simply move the
controller in the freezer to the “COOL” position until the desired temperature has been attained
and then return the controller to the “Recommended” position.
NOTE: If the unit is unplugged, has lost power, or is turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the refrigerator-freezer will
not start.
Humidity Control
There is a humidity control gauge on the crisper that can be used to control the level of humidity
inside the crisper.
Loading ...
Loading ...
Loading ...