Loading ...
Loading ...
Loading ...
4
Exterior Door Panel
Before cleaning the front panel, make sure you know what type of
panel you have. Refer to the last two letters of your model number.
You can locate your model number on the left-hand tub wall just
inside the door.
• If your model number ends with BB, CC, WW, SA, SH, ES, DS, TS,
FS, W2 or D1 then you have a painted door panel.
• If your model number ends with SS, then you have a Stainless Steel
door panel.
• If your model number ends with II, then you have an Integrated door
panel.
• If your model number ends w
ith S5, then you have a glass door
panel.
Follow the instructions for cleaning door panel for your model.
Painted/Coated Door Panels (model numbers ending in BB–
black, CC–bisque, WW–white, SA–silver, SH–PRO steel, ES–
slate, DS–black slate, TS–black stainless steel, FS–fingerprint
resistant stainless steel, W2–matte white or D1–matte black)
DO NOT use Stainless Steel cleaners on the door surfaces.
Use a clean, soft, lightly dampened cloth, then dry thoroughly.
Stainless Steel Door Panel (model numbers ending in SS)
For cleaning rust and tarnish, cleaners with oxalic acid such as
Bar Keepers Friend Soft Cleanser™ will remove rust, tarnish and
small blemishes. Use only a liquid cleanser free of grit and rub in the
direction of the brush lines with a damp soft sponge. Do not use
appliance wax or polish on the stainless steel.
For other blemishes and marks, use Stainless Steel Magic or
a similar product using a clean soft cloth. Do not use appliance
wax, polish, bleach or products containing chlorine on Stainless
Steel. You can order Stainless Steel Magic #WX10X29 through
GE Appliances Parts by calling 877.959.8688. In Canada, call
800-661-1616.
Integrated Door Panel (model numbers ending in II)
This is a custom installed door panel, and you will need to refer to
the cabinet manufacturers recommendations for proper cleaning.
Glass Door Panel (model numbers ending in S5)
Use a glass cleaner or mild soap and water and a soft cloth to
clean the glass door.
Do not use any abrasive powders.
Inspect and clean the filters periodically. This should be done every other month or more depending on usage. If there is a decrease in
wash performance or dishes feel gritty, this is also an indication the filters need to be cleaned.
Filters
Fine Filter
Ultra Fine Filter
Spray
Arm
Ultra-Fine Filter Assembly
To clean the Ultra-Fine Filter assembly, remove
the bottom rack. Twist the Ultra-Fine Filter assembly
counterclockwise and lift to remove for cleaning.
Rinse filter with warm soapy water and use a
sponge to carefully remove any stubborn particles.
For models with a 2-piece Ultra-Fine Filter assembly
with an additional Filter Basket for food particles,
twist the Filter
Basket in the counterclockwise
direction to unlock it from the Ultra-Fine Filter
assembly. See directional arrows on the bottom
of the
Filter Basket. Pull the Filter Basket to remove from
the
assembly, throw away any food particles, rinse with
warm soapy water, and use a sponge to remove any
stubborn particles.
Once cleaned, replace Filter Basket back into the
Ultra-Fine Filter assembly and twist it clockwise to
lock into place.
2-piece - Ultra-fine Filter assembly with additional
Filter Basket (on some models)
Fine Filter
To clean the Fine Filter (mesh plate), remove the
bottom rack. Remove the Ultra-Fine Filter. Remove
the Fine Filter. Rinse filter with warm soapy water.
Scouring pads or brushes can scratch the filter
surface but a soft brush or sponge may be needed
to remove stubborn soils or calcium deposits caused
by hard water. Once cleaned, replace the Fine Filter
and the Ultra-Fine Filter.
Care and cleaning
Loading ...
Loading ...
Loading ...