Package Contents
1
Introduction
2
Hardware Description
3
LED Color Function
LAN Green
This Product is a Gigabit IP67 waterproof PoE extender independently developed by our company. It
supports one JR45 (PD) port in and 95W input(IEEE802.3bt). Two ports have PSE function, each supporting
up to 30W output, without configuration, plug and play.
Professional room shell design, adapted to various harsh environments, with high stability, reliability,
industrial level, wide temperature. The whole machine does not need power adapter, so it is convenient for
harsh outdoor environment .reliable and convenient power for outdoor work AP, cameras etc.
Schematic diagram of left panel: input port (PoE In) and grounding column, Standard network Cate5 cable
(line diameter 5.5mm).
Schematic diagram of right panel: the output port (PoE out) requires the use of standard network cate5
cable (Line diameter 5.5mm).
The front panel composed by PSE output port，input port and relevant indicator, as shown below:
Check the following contents of your package:
PoE Extender x 1
User Guide x 1
Wrench x 1
Accessories (water joint)
If any part is lost and damaged, please contact your local agent immediately.
Front Panel
Off: No device is connected to the corresponding port.
Light: Indicates the link through that port is successfully established at 10/100/1000Mbps.
Blink: transmitting data and power.
POE 35
95W PoE Injector
Data+Power 100 Metres
Data+Power 100 Metres
Data+Power 100 Metres
Gigabit Switch
Application diagram of PoE Extender
4
Desktop Installation
Install the machine on a desktop, place the machine carefully on the counter, the bottom is as follows:
Wall-mounted installation
Please follow these steps to install the machine:
First fix the four screws on the wall (screw cap diameter recommended 5.5-6.5mm) and turn the machine
upside down. Align the four fixing holes of the machine as shown below and hang the machine smoothly on
the screws.
Left Panel
Right Panel
Quick Installation Guide
Model: POE35
EU declaration of conformity
Cudy hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.The
original EU declaration of conformity may be found at http://www.cudy.com/
810600100
Email: support@cudy.com
Specifications
5
Model
Port
Standard
Network Media(Cable)
Dimensions (L*W*H)
PoE input
PoE power output
PSE Power on RJ-45
Temperature
Humidity
Waterproof rate
Hazardous rating
POE35
PoE in port:1 x 10/100/1000Mbps RJ45 port
PoE out port : 2 x 10/100/1000Mbps RJ45 port
IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af,
IEEE802.3at, IEEE802.3bt， IEEE802.3x
10BASE-T: UTP category 3,4,5 cable (≤100m)
100BASE-TX: UTP category 5 cable (≤100m)
1000BASE-T: UTP category 5e cable (≤100m)
150*73*44MM
95W Max
48-55V DC Max.30W
PoE in port: Anode1/2 Cathode3/6 or Anode4/5 Cathode7/8
PoE out port: Anode7/8 Cathode4/5
Operating Temperature: -20°C ~ 60 °C
Storage Temperature：-40 °C ~ 80 °C
Operating Humidity: 10% ~ 90% non-condensing
Storage Humidity: 5% ~ 90% non-condensing
IP67
IK10
Email:
support@cudy.com
Driver & Manual:
www.cudy.com/download
