Loading ...
Loading ...
Loading ...
PAGE 11
OPERATING YOUR DISHWASHER
► To open the dispenser, turn the cap to the "open" arrow, anti-clockwise, and
lift out. (1)
► Pour the rinse aid into the dispenser, being careful not to overfill. (2)
► Replace the cap by inserting it aligned with the "open" arrow and turn
clockwise. (3)
Warning! Be careful not to overfill the dispenser and wipe up any
excess spilt with a damp cloth. Any residual rinse aid can
cause excess foaming during the next wash.
ADJUSTING THE RINSE AID DISPENSER
The rinse aid dispenser has six or four settings. Always start with the dispenser
set on "4". If spots and poor drying are a problem, increase the amount of rinse
aid dispensed by removing the dispenser lid and rotating the dial to "5". If the
dishes are still not drying properly or are showing spots, adjust the dial to the
next higher lever until your dishes are spot-free. The recommended setting is
"4". (Factory value is "4".)
► Increase the dose of rinse aid if there are drops of water or lime spots on the
dishes after washing. Reduce it if there are sticky whitish stains on your dishes
or a film on your glassware or cutlery.
Loading ...
Loading ...
Loading ...