Loading ...
Loading ...
Loading ...
EEEEEETROUBLESHOOTING
Review this chad to find do-it-yourself solutions for minor performance problems,
PROBLEM POSSIBLECAUSE POSSIBLESOLUTION
Cleanerwon'tstart.
Poor job of dirt
pick-up.
Cleanerstartsbut
cutsoff.
POWER-MATETM willnot run.
Performanceindicator
lighton.
I.Unpluggedatwalloutlet.
2.Trippedcircuitbreaker/blown
fuseathouseholdservicepanel.
3.Looseelectricalconnections.
4.TrippedOverloadProtectorin
POWER-MATE7M
i. Fullor clogged dust bag
2. Clogged airflow passages.
3. Dirty motor safety filter.
4. Wrong pile height setting.
5. Open suction control.
6. Hole in hose.
7. Worn POWER-MATETM brushes.
8. Worn or broken belt.
9. Dirty brush or brush supports.
10. Canister hood open.
1. Hose or hood electrical
connections.
2. Tripped Overload Protector
in POWER-MATETM
3. TrippedOverload Protector
incanister.
I.
2.
.
4.
I. Plug in firmly, push On/Off switch to ON.
2. Reset circuit breaker or replace fuse.
3. Reconnect all assembly points, (pages 5,6).
4. Clean brush and brush supports, then reset
(pages 13, 14, 15).
.
2.
3.
4.
5.
6.
7.
8.&9.
10.
Change bag, (page 11).
Clear airflow passages, (page 11).
Clean filter, (page 12).
Adjust setting, (page 8).
Adjust control, (page 10).
Replace hose.
Change brushes, (page 15).
See "BELTCHANGING AND BRUSHCLEANING,u
(pages 13, 14, 15).
Close and latch hood.
I.Check connections,reconnecthose
ends,(pages6).
2.Remove any itemsthatmay be caught
orjammed,thenreset.Ifcleanerstartsand
stopsagain,cleanbrushand brushsupports,
thenreset,(pages13,14,15).
3.Change dustbag,clearairflowblockage,
(page1I),Wait20minutesformotortocool
and automaticallyreset.
POWER-MATE TM connectionsunplugged. I.
Worn orbrokenbeltin 2.& 3.
POWER-MATE.TM
Dirtybrushorbrushsupports,
TrippedOverload Protector 4.
inPOWER-MATE. TM
I.
2.
3.
I. Fullorclogged dustbag.
2. Dirtymotorsafetyfilter.
3. Blockedairflowpassage.
Plug in firmly, (page 5).
See "BELTCHANGING AND BRUSHCLEANING,"
(page 13).
Check brush area for excessive lint build-up or
jamming. Clean brush and brush supports,
then reset, (pages 13, 14, 15).
4. Certain attachment tools. 4.
Cleaner picks up movable 1. Wrong pile height setting. 1. Adjust setting, (page 8).
rugs-OR- POWER-MATETM 2. Suction too strong. 2. Open suction control, (page 10).
pushestoo hard.
Lightwon't work. I. Burned out bulb. I. Change bulb, (page 13).
Cord won't rewind. I. Dirty power cord. I. Clean the power cord.
2. Cord jammed. 2. Pulloutcord and rewind,
Cleanerleavesmarks I.Wrong vacuuming pattern. I,See "VACUUMING TIPS,"(page 8),
on carpet.
16
Change bag, (page 11).
Clean filter, (page 12).
Clear blockage from airflow passage,
(page 11).
Thisisnormal. Ught should go off when tool
isremoved.
Loading ...