Loading ...
Loading ...
Loading ...
201107 - 1600 EXPANSION BATTERY
ASSEMBLY
18
Pairing with Power Station
CAUTION
The Expansion Battery and Power Station can not be used to
charge each other in place of AC or DC input charge.
1. Turn on the Power Station and unplug all devices and any
other Expansion Batteries from the Power Station. Do not
attempt to pair multiple Expansion Batteries at the same time.
2. Connect the fully charged Expansion Battery to the
Power Station.
229.796
3. Hold down the overload reset button of the POWER STATION.
While holding down the button, press the On/Off button of the
POWER STATION two times.
4. The LED light on the POWER STATION will illuminate, then
flash 3 times (if LED light does not turn on or flash 3 times,
repeat steps 2 and 3, making sure no other Expansion
Batteries are connected during the pairing process).
5. To pair additional Expansion Batteries, repeat steps 1-4.
Charging From Wall
CAUTION
Do not charge Expansion Battery or Power Station while
they are connected to each other. Doing so will cause a fault
condition. If fault occurs, disconnect Expansion Batteries from
Power Station and charge each individually.
NOTICE
The Expansion Battery must be fully charged every 180 days
when in storage, to keep the internal battery in good operating
condition.
1. Plug the AC Charging Cable into the AC input port on the back
of the charging module.
2. Plug the other end into a standard wall outlet.
3. Connect charging module to Expansion Battery.
Loading ...
Loading ...
Loading ...