KETTLE
INSTRUCTION MANUAL
MODEL: KE5502
Read this booklet thoroughly before using and save it for future reference.
IMPORTANT SAFETY INSTRUCTIONS
1. Read all instructions before using.
2. Before connecting the kettle to the power supply, check
that the voltage indicated on the appliance (underside
the kettle & base) corresponds with the voltage in your
home. If this is not the case, contact your dealer and
stop using the kettle.
3. Do not let the cord hang over the edge of a table or counter
or touch a hot surface.
4. Do not place on or near a hot gas or electric burner or in a
heated oven.
5. Do not operate the appliance without anything in it to
avoid damaging the heat elements.
6. Ensure that the kettle is used on a firm and flat surface out
of reach of children, this will prevent the kettle from
overturning and avoid damage or injury.
7. To protect against a fire, electric shock or personal injury,
do not immerse cord, electric plugs or kettle in water or
other liquids.
8. While water is boiling, or just after the water has been
boiled, avoid contacting with steam from the spout.
9. Always take care to pour boiling water slowly and
carefully without tipping the kettle too fast.
10. Be careful of refilling when the kettle is hot.
1
11. This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
12. Children should be supervised to ensure that they do not
play with the appliance.
13. Do not touch the hot surface. Use the handle or the
button.
14. The attached base can not be used for other than
intended use
15. Extreme caution must be used when moving an
appliance containing hot water.
16. The appliance is not a toy. Do not let the children play it.
17. The kettle is for household use only. Do not use
outdoors.
18. The use of accessories, which are not recommended by
the appliance manufacturer, may result in fire, electric shock
or personal injury.
19. Unplug the kettle from the outlet when not in use and
before cleaning. Allow the kettle to cool before putting on
2
or taking off parts, and before cleaning the appliance.
20. To disconnect, turn any control to “off,” then remove
plug from wall outlet.
21. If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
22. Do not use the appliance for other than intended use.
23. The kettle can only use with the stand provided.
24. If the kettle is overfilled, boiling water may spill out.
25. Always ensure the lid is closed and do not lift it while
the water is boiling. Scalding may occur if the lid is
removed during the brewing cycles.
26. This appliance is intended to be used in household and
similar applications such as:
– Staff kitchen areas in shops, offices and other working
environments;
– Farm houses;
– By clients in hotels, motels and other residential type
environments;
– Bed and breakfast type environments.
27. Save these instructions.
3
KNOW YOUR ELECTRIC KETTLE
BEFORE USING YOUR KETTLE
If you are using the kettle for the first time, it is recommended that you should
clean your kettle before use by boiling the Max capacity of water once and then
discarding the water twice. Wipe the surface with a damp cloth.
NOTE: The max capacity of kettle is 1.7L.
USING YOUR ELECTRIC KETTLE
1. Place the kettle on the flat surface.
2. To fill the kettle, remove it from the power base and remove the lid handle to
open the lid, then fill the kettle with the desired amount of water and close the
lid. The water level must be within the Min and the Max level. Too little water
4
will cause the kettle switching off before the water has boiled.
NOTE: Do not fill the water over the maximum level, as water may spill out of
the spout when boiling. Ensure that the lid is firmly in place before plugging the
power outlet.
3. Position the kettle on the power base.
4. Connect the plug into a power outlet. Press the power switch and its indicator
will light up, and then the kettle starts to boil the water. The kettle will switch
off automatically and the indicator will turn off once the water has boiled. If
necessary, it will take you 30 seconds to wait before pressing the power switch
again to re-boil the water. You may shut off the power by directly lifting the
kettle from the power base at any moment to stop boiling process.
NOTE: Ensure that switch is free of obstructions and the lid is firmly closed, the
kettle will not turn off if the switch if be constrained or if the lid is opening.
5. Lift the kettle from the power base and then pour the water.
NOTE: Operate carefully when pouring the water from your kettle as boiling
water may result in scald, besides, don’t open the lid while the water in the kettle
is hot.
6. The kettle will not re-boil until the switch is pressed again. The kettle may be
stored on the power base when not in use.
NOTE: Always disconnect the power supply when not use.
5
BOIL-DRY PROTECTION
Should you accidentally let the kettle operate without water, the function of
boil-dry protection will automatically switch off the power. If this occurs, allow
the kettle to cool prior to filling with cold water before re-boiling.
CLEANING AND MAINTENANCE
Always disconnect the appliance from the power outlet and cool it down
completely before cleaning.
1. Never immerse the kettle, power cord or power base in water, or allow
moisture to contact with these parts.
2. Wipe the appearance of body with a damp cloth or cleaner, never use a
poisonous cleaner.
CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to clean
the outside of the kettle to prevent the gloss loss.
3. When not use or storage, the power cord may be wound under the power base.
REMOVAL OF MINERAL DEPOSITS
Your kettle should be periodically descaled as the mineral deposits in tap water
may form scale on the bottom of kettle so as to cause the operation less
efficiency. You can use the commercially available descaler and follow the
instructions on the package of descaler. Alternatively, you may follow below
6
instructions using the white vinegar.
1. Fill the kettle with 3 cups of white vinegar, then adding water to the amount
so as to cover the bottom of kettle completely. Leave the solution in the kettle
overnight.
2. Then discard the mixture in the kettle, then filling the kettle with clean water
to the maximum position, boiling and then discard the water. Repeat several
times until the odor of vinegar has been flushes away. Any stains remaining
inside the spout can be removed by rubbing with a damp cloth.
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local regulations:
hand in the non-working electrical equipments to an
appropriate waste disposal center.
7
Shenzhen Impression E-commerce Co., Ltd
Pagina
Facebook:
https//www.facebook.com/aicoks/
Sito Web: www.aicok.cc
Indirizzo: Cabina No.3H012, Trading Plaza,
No.5, Città di Huanan,
Via Pinghu, Distretto di Longgang, Shenzhen,
Cina
Fabbricato in Cina
35
