Loading ...
Loading ...
Loading ...
11
Non-Vented (recirculating) Installation Filters
with normal use. Replace with Charcoal Filter Kit. See the
“Assistance or Service” section for information on ordering.
1.
Grease Filter” in this section.
2.
3.
4. Bend spring clips back into place to secure the
5.
Replacing a LED Lamp
To avoid damage or decreasing the life of the new lamp, do not
wearing cotton gloves to handle lamp.
If new lamps do not operate, make sure the lamps are inserted
correctly before calling service.
1. Disconnect power.
2. Push up on the lens and turn it counterclockwise.
3. Remove and replace it with an appropriate Energy Star
GU10 base. Turn it clockwise to lock it into place.
4. Repeat steps 2-3 for the other lamps if needed.
5. Reconnect power.
NOTE: When used in recirculation mode, To Reduce the Risk of
Fire and Shock use only convertion kit Models:
- Charcoal Filter Kit W10294730
- Recirculation Kit W10349327
Loading ...
Loading ...
Loading ...