Loading ...
Loading ...
Loading ...
11. MAINTENANCE
- 20 -
$
FIG.21
FIG.22
11.1 ARBOR REMOVAL -
FIGS .21 - 22
To aid removal of the arbor from the spindle a
drift key is supplied.
Lower the spindle with the plunge handles to
expose slot $. Rotate the spindle to align
the inner and outer slots.
Insert the drift key and allow the spindle to
raise. Tap the drift key while supporting the
chuck.
Regular inspection and cleaning reduces the
necessity for maintenance operations and will
keep your tool in good working condition.
The motor must be correctly ventilated during
tool operation. For this reason avoid blocking
the air inlets. After use disconnect the tool
from the power supply and vacuum the
ventilation slots.
If the replacement of the supply cord is
necessary, this has to be done by the
manufacturer or his agent in order to avoid a
safety hazard.
At regular interval, lubricate the spindle with a
medium purpose grease. With the pulley
cover open, pack the grease down the centre
of the front pulley. Operate the plunger
mechanism and brush a thin film of grease on
the quill. Clean any debris built up in the
pulley housing. Spray a general purpose
lubricating agent/rust inhibitor on the other
moving parts and machined surfaces.
Loading ...
Loading ...
Loading ...