Loading ...
Loading ...
Loading ...
- 14 -
7. UNP
8. ASSEMBLY
%
FIG.9
8.6 CHUCK GUARD - FIG.9
Loosen the cross slot machine screw and nut.
Pass the chuck guard over the chuck onto
collar $. When located fully and aligned on
the collar, tighten the machine screw and nuts
to secure the chuck guard in place.
NOTE: Do not over tighten as it may damage
the guard.
To adjust the lower acrylic guard section down
and fully cover the chuck and drill bits, loosen
wing nuts %.
When adjustment is complete, tighten the
locking nuts.
NOTE: The chuck guard shall be inspected
before each use to determine effectiveness and
correct functionality.
The chuck guard shall be adjusted and
positioned between the chuck and operator for
all processes.
Replace a damaged or missing chuck guard
before continuing to use the drilling machine.
8.7 BENCH/FLOOR MOUNTING
Securely bolt the drilling machine to a work
bench or other secure surface as appropriate
through the various points in the base (fixings
are not supplied). Suitable fixings should be
sourced applicable to the load and mounting
surface. Ensure there is enough clear space
around the drilling machine to accommodate
larger items which may be drilled.
Ensure the load created by the drilling
machine, operator and workpiece combined
will not compromise the integrity of the
intended mounting surface/floor space.
$
Loading ...
Loading ...
Loading ...