Loading ...
Loading ...
Loading ...
9. SETTING THE BENCH DRILL
- 17 -
9.4 WORK TABLE ADJUSTMENT -
Figs. 16-19
For versatility, the work table can be
raised or lowered, tilted ±45° or rotated 360°
around the column.
To tilt the table, slacken off bolt % a
complete turn and unscrew grub screw &
with a hex. wrench until table can be rotated.
Adjust the table’s degree of tilt and re-secure
with locking bolt %. Use the scale as a
guide. Alternatively use a protractor off the
table to the drill bit for more accuracy.
When the table is back in a level position,
screw grubscrew back in to hold table in level
position and re-tighten bolt %
To raise/lower the table working height,
loosen locking handle and turn the
height adjustment crank handle to raise
or lower the table. Alternatively while locking
handle is loose the table can be rotated
180° to further increase the distance between
the chuck and workpiece. When the
adjustments are complete re-secure locking
handle .
The slots in the work table and base can
accommodate locking bolts to secure a small
vice enabling safe clamping of the workpiece.
CAUTION: A drill bit snagging on a piece of
work will violently grab the piece of material,
whipping it round and is likely to result in
personal injury. Always ensure the workpiece
is securely clamped.
FIG.16
FIG.17
FIG.18
%
FIG.19
&
Loading ...
Loading ...
Loading ...