Loading ...
Loading ...
Loading ...
if youhaveanyproblemsoperatingyourpressurewasher,
pleasecallthepressurewasherhelplineat(800}743-4115.
Pressure Washer Lecatian
Carben IVlenexidePoisening
WARNING POISONOUS GAS HAZARD. Engine
exhaust contains carbon monoxide, a poisonous
gas that could kill you in minutes. You CANNOT
smell it, see it, or taste it. Even if you do not
smell exhaust fumes, you could still be exposed to carbon
monoxide gas.
, Operatethis product ONLY outside far away from windows,
doors and vents to reducethe risk of carbon monoxide gas
from accumulating and potentblly being drawn towards
occupied spaces,
Install battery-operated carbon monoxide abrms or plugqn
carbon monoxide abrms with battery back-up according to the
manufacturer's instructions, Smoke abrms cannot detect
carbon monoxide gas,
, DO NOTrun this product inside homes, garages,basements,
crawbpaces, sheds, or other partially-enclosedspaces even if
using fans or opening doors and windows for ventilation,
Carbon monoxide can quickly build up in these spacesand can
linger for hours, even after this product has shut off.
ALWAYS placethis product downwind and point the engine
exhaustaway from occupied spaces,
if you start to feel sick, dizzy, or weak while using this product.
shut it off and getto fresh air RIGHTAWAY See a doctor. You
may havecarbon monoxide poisoning.
/
Risk of Fire Ciearanees
A WARNING Exhaust heat/gasescould ignite
combustibles, structures or damagefuel tank
causing a fire, resultingin death or serious injury.
* Keepat least 5 ft. (1.5 m) clearanceon all sides of pressure
washer including overhead.
Haw to Start Your Pressure Washer
To start your pressure washer for the first time, follow these
instructions step-by-step. This starting information also
applies if you have let the pressure washer sit idle for at bast
a day,
1. Place pressure washer near an outside water source
capable of supplying water at a flow rate greater than
5.0 gallons per minute (18.9 liters per minute) and no
less than 20 PSi (1.38 BARS)at pressure washer end
of garden hose. DO NOT siphon supply water.
2. Checkthat high pressure hose is tightly connected to
spray gun and pump. SeeAssembly section.
3. Make sure unit is in a level position.
4. Connect garden hose to water inlet on pressure washer
pump.
NOTICE DO NOT run the pump without the water supply
connected and turned on.
, Damageto equipmentresultingfromfailureto follow this
instructionwill voidwarranty.
5, Turn ONthe water, press red button on spray gun and
squeezethe trigger to purgethe pump system of air and
impurities.
6. Attach nozzleextension to spray gun. Tighten by hand.
.
.
Choosespray tip you want to use, pull back on collar of
nozzleextension, insert spray tip and releasecollar. Tug
on spray tip to make sure it is securely in place. See
How to Use @ray Tips.
Move fuel shut-off valve (B) to ON (I) position.
12 BRIGGSandSTRATTON.CONI
Loading ...
Loading ...
Loading ...