Loading ...
Loading ...
Loading ...
INSTALLATION
Installation
ENGLISH
www.stiebel-eltron.com CNS Trend | 9
10. Installation
10.1 Minimum clearances
≥150≥100
≥100 ≥100 ≥500
≥20
D0000068096
10.2 Installing the wall mounting bracket
The appliance is intended for wall mounting using the wall mount-
ing bracket supplied. The appliance may only be installed hori-
zontally.
Note
- The wall mounting bracket can be used as a tem-
plate for wall mounting. This ensures sufficient
clearance from the floor.
- Use a spirit level if the floor is uneven or sloping.
aaa
D0000072159
1
3
2
4
≥224 ≥224
D0000072312
Unhook the wall mounting bracket from the appliance.
Place the centred wall mounting bracket horizontally on the
floor. Mark holes1 and 2.
Lift up the wall mounting bracket so that its lower holes
match up with the markings you have just made on the in-
stallation wall.
Mark holes3 and 4 on the installation wall.
Drill the holes at the 4markings.
Secure the wall mounting bracket with suitable fixing ma-
terials (screws, rawl plugs). With the vertical slots, you can
compensate for an offset fixing hole.
10.3 Appliance installation
D0000072157
1
1 Wall mounting bracket
Hook the appliance onto the bottom tabs of the wall mount-
ing bracket by the slots in the back of the appliance.
Place the appliance in an upright position.
Secure the appliance by pushing it towards the wall until it
audibly snaps into place in the two upper springs on the wall
mounting bracket.
D0000072158
1
2
1 Appliance
2 Locking screw
Secure the appliance against unintentional release using
the supplied locking screw on the left-hand side of the wall
mounting bracket.
Loading ...
Loading ...
Loading ...