Loading ...
Loading ...
Loading ...
Additional functions
51
Stop&Go
When Stop&Go is activated, the power
of all cooking zones in use is reduced to
power level1.
The cooking zone power levels and the
timer settings cannot be altered; the
hob can only be switched off. The
minute minder, switch-off, booster and
AutoBoost times continue to run.
When Stop&Go is deactivated, the
cooking zones will continue to operate
at the power/frying level previously se-
lected.
If the function is not deactivated within
1hour, the hob will switch off.
Activating/Deactivating
Touch the sensor control.
Recall
If the hob is switched off by mistake
during use, this function can be used to
reset all settings. For this to work, the
hob must be switched on again within
10seconds of being switched off.
Switch the hob on again.
The indicators for the power/frying
levels previously set will flash.
Press one of the flashing power or
frying level indicators immediately.
All the cooking zones and the timer will
continue to operate using the settings
selected previously.
Loading ...
Loading ...
Loading ...