Loading ...
Loading ...
Loading ...
EN - 12
Sharp.
Cooling air ducts
.
Not clogged.
Machine
Throttle control lever
Test driving
6.2.2 Machine operating test
Action Result
1.
2.
1.
2. operate the throttle
control lever
throttle
release the throttle
control lever
throttle
1.
2.
The levers should
neutral position and
should stop.
throttle
control lever
The throttle control lever
If any of the results fail to match
the indications provided in the tables
below, do not use the machine! Take
it to a service centre to be checked
and repaired if necessary.
6.3
6.3.1 Start-up with battery
1.
2.
3.
4.
6.3.2 Start-up with battery
simulator (if available)
1.
2.
3.
4.
5.
6.
7. press the throttle control
6.4 OPERATION
NOTE Before starting any tasks for
the rst time, get to know the machine,
learn the most suitable cutting techniques,
make sure your are wearing the harness
correctly, grip the machine rmly and make
the movements required by the job.
NOTE During use, the battery is
protected against total drainage with a
protective device that switches o the
machine and stops it from working.
NOTE Battery power reserve (and
therefore the cuttable vegetation area
before recharging is required) depends on
many factors described in (par. 7.2.1).
NOTE After one minute of inactivity, if turned
on, the machine will automatically switch o.
6.4.1
6.4.1.a Cutting line head
Use ONLY nylon lines. The use of
metal lines, plastic coated metal lines and/
Loading ...
Loading ...
Loading ...