Loading ...
Loading ...
Loading ...
EN - 9
4.1 ASSEMBLY COMPONENTS
4.1.1 Unpacking
1.
2.
3.
4.
5.
Before assembling, make sure the
battery is not inserted in its housing.
4.2 GRIP ASSEMBLY
4.2.1 Assembly of the front hand grip
1.
2.
3.
4.2.2 Fitting the handle bar
1.
2.
sure that the controls are on the right.
3. Arrange the handle bar in the
NOTE Loosen the knob (Fig. 4.A) in
order to rotate the handle bar and reduce its
overall dimensions for storage purposes.
4.3 FITTING/REMOVING CUTTING
MEANS AND SPECIFIC GUARDS
Wear protective gloves.
IMPORTANT When the cutting means
has to be changed, remove the battery from
its housing and dismantle all the parts.
4.3.1 Selecting the cutting means
-
• the cutting line head can cut tall grass and
• the 3 -point and 4-point blades are
.
4.3.2 Fitting the guard on the
cutting means
1.
2.
NOTE On the guard of the cutting
means there is the following symbol:
It indicates the
rotation direction of
4.3.3 Fitting and removing cutting means
4.3.3.a Fitting the cutting line head
1.
2.
IMPORTANT When using the cutting line
head, the line cutting knife must always be
installed (Fig. 7.A). The machine is delivered
with a cutting diameter set to 38cm.
4.3.3.b Removing cutting wire head
1.
2.
4.3.3.c Fitting the 3-point, 4 -point blade
Loading ...
Loading ...
Loading ...