Loading ...
Loading ...
Loading ...
EN
55
Picture mode
Two more settings are optionally available:
– “Shift” – moving the complete bracketing series in the direction
of underexposure/overexposure
The selected exposure compensation value will be applied to the
entire exposure series. This allows you to produce more or only
alternatives with higher or lower exposures.
– Release method for the series
Setting an exposure compensation value
▸ Select
Exposure Compensation in the Exposure Bracketing submenu
▸ Select the desired setting
Setting the release method
▸ Select
Automatic in the Exposure Bracketing submenu
▸ Select the desired setting
The factory setting
On will run the entire exposure series after the
shutter button is pressed once; when the setting is
Off, each expo-
sure must be done individually.
Notes
• Depending on the exposure mode chosen, gradations are pro-
duced by changing the shutter speed (
P/A/M) or the aperture
(
S).
• The sequence of the pictures: correct exposure/underexpo-
sure/overexposure
• Depending on the available shutter speed/aperture combina-
tion, the working range for automatic bracketing may be limited.
• Once set, bracketing remains active after any number of re-
leases and even after the camera was switched off, i.e. until it is
reset to ±
0 (= center of scale).
Manual setting – M
A manual setting of shutter speed and aperture may be beneficial if
you want to achieve a specific image effect that is possible only
with a very specific exposure, or if you want to ensure that several
pictures with different image sections have an identical exposure.
Taking a picture
▸ Select the desired aperture value with the right setting wheel
▸ Select the desired shutter speed value with the left setting wheel
▸ Press the shutter button to the first pressure point
The shutter speed and aperture values are displayed in white.
The light balance scale is additionally displayed. It covers a range
of ±3 EV (exposure value) in 1⁄3EV increments.
Settings within ±3 EV are indicated by white lines on the scale,
settings outside this range by red lines.
▸ Adjust the settings for correct exposure so that the central mark
is displayed in white
Once the set values and/or the exposure appear to be appropriate
for the intended composition:
▸ Press the shutter button down to take the picture
Note
The screen image will show an exposure simulation if
P-A-S-M is
selected in the menu item
Exposure Preview
Loading ...
Loading ...
Loading ...