GE PSDW3YGXCFSS X series Side-by-Side Refrigerator

Owner’s Manual and Installation - Page 18

For PSDW3YGXCFSS. Series: X series

PDF File Manual, 132 pages, Read Online | Download pdf file

PSDW3YGXCFSS photo
Loading ...
Loading ...
Loading ...
Replacingthe light bulbs.
Setting the controls to OFF does not remove power to the light circuit.
Not all features are on all models.
Yourlight shieldwilllooklike
oneof thefollowing:
Tabs
OR
Refrigerator Compartment--Upper Light
0 Unplug the refrigeratoE
0 Thebulbs are located at the top of
the compartment, insidethe light shield.
On some models,a screw at the front of
the light shieldwill haveto be removed.
On other models,the screw islocated
in the pocket located at the back of
the light shield.
Toremove the light shield,on some
models,pressin on the tabs on the sides
of the shield and slideforward and out.
On other models,just slidethe shield
forward and out.
After replacingthe bulb with an
appliance bulb of the sameor lower
wattage, replacethe light shieldand
screws (on some models).When
replacingthe light shield,make sure
that the tabs at the back of the shield
fit into the slotsat the back of the light
shield housing.
Plugthe refrigerator back in.
Refrigerator Compartment--Lower Light
This light is located above the top drawer.
Unplugthe refrigeratoE
Removethe convertible meat drawer
control knobby pulling straight out.
Liftthe light shieldup and pull it out.
After replacingthe bulb with an
appliance bulb of the sameor lower
wattage, replacethe shieldand
the knob.
Plug the refrigerator back in.
Freezer Compartment
Unplugthe refrigeratoE
Removethe shelfjust abovethe light
shield.(Theshelfwill be easierto remove
if it isemptied first.) On some models,a
screw at the top of the light shieldwill
needto be removed,
To remove the light shield, press in
on the sides, and lift up and out.
Replace the bulb with an appliance
bulb of the same or lower wattage,
and reinstall the light shield. When
reinstalling the light shield, make sure
the top tabs snap securelu into place.
Replace the screw (on some models).
Reinstall the shelf and plug
the refrigerator back in.
Dispenser tonsomemodels)
Unplugthe refrigerator.
Thebulb islocated on the dispenser
under the control panel.Removethe light
bulb bg turning it counterclockwise.
Replace the bulb with a bulb of
the same size and wattage.
Plug the refrigerator back in.
I_ Display
18
Refrigerator Compartment (LCD models only)
There is an LED lighting display in the top
of the refrigerator compartment in LCD
models. If this assembl Uneeds to be
replaced, call GEService at 1.800.432.2737
in the United States or 1.800.561.3344
in Canada.
Loading ...
Loading ...
Loading ...