Loading ...
Loading ...
Loading ...
34 MAINTENANCE
Application Guidelines/
Water Supply Parameters
Service Flow 0.5 gpm (1.9 Ipm)
Community or private well
Water Supply - Potable Water
Water Pressure 20 -120 psi (138 - 827 kPa)
WaterTemperature 33°F - 100°F (0.6°C - 38°C
Capacity 200 gallons (757 liters)
It is essential that the manufacturer's recom-
mended installation, maintenance and filter
replacement requirements be carried out for the
product to perform as advertised.
,_ NOTE -,,
• While the testing was performed under
/ standard laboratory conditions, actual /
Replacement Cartridge: ADO73613401
For estimated costs of replacement elements
please call USA 1-800-243-0000CANADA
1- 888-542-2623 (24 hours per day/7 days per
week) or visit our website at www.lge.com
WARNING ................................................................
To reduce the risk associated with chok-
ing:
• Do not allow children under 3 years of
age to have access to small parts dur-
ing the installation of this product.
To reduce the risk associated with the
ingestion of contaminants:
• Do not use with water that is microbi-
ologically unsafe or of unknown quality
without adequate desinfection before or
after the system. Systems certified for
cyst reduction may be used on disin-
fected ,water that may contain filterable
cysts. EPA Establishment # 070595-
MEX-001
J
CAUTION
To reduce the risk associated with property
damage due to water leakage:
• Read and follow Use Instructions before
installation and use of this system.
• Installation and use MUST comply with
all state and local plumbing codes.
• Do not install if water pressure exceeds
120 psi (827 kPa). If your water pressure
exceeds 80 psi, you must install a pres-
sure limiting valve. Contact a plumbing
professional if you are uncertain how to
check your water pressure.
• Do not install where ,water hammer
conditions may occur. If water hammer
conditions exist you must install a water
hammer arrester. Contact a plumbing
professional if you are uncertain how to
check for this condition.
• Do not install on hot ,water supply lines.
The maximum operating water tem-
perature of this filter system is 100°F
(37.8°C).
• Protect filter from freezing. Drain filter
when temperatures drop below 40°F
(4.4°C).
• The disposable filter cartridge MUST be
replaced every 6 months, at the rated
capacity or if a noticeable reduction in
flow rate occurs.
• Protect from freezing, remove filter car-
tridge when temperatures are expected
to drop below 33 ° E
• Do not install systems in areas where
ambient temperatures may go above
110° F (43.3 ° C). Where a backflow
prevention device is installed on a water
system, a device for controlling pres-
sure due to thermal expansion must be
installed.
, Ensure all tubing and fittings are secure
and free of leaks.
Manufactured for LG Electronics by MCM Co.,
Ltd. 45-10, NowomRi, YiwoI-Myun, JinchumKun,
Chung-Buk, Korea.
Loading ...
Loading ...
Loading ...