Loading ...
Loading ...
87D0174
3
SSTB11 Woodburning Fireplace
IMPORTANT SAFETY INFORMATION
Installer Owner
Please leave these instructions with the owner. Please retain these instructions for future reference.
1. Read these instructions entirely before beginning any
part of the installation. Save these instructions for any
future repairs.
. Use these instructions as a guide during the installa-
tion of the replace.
3. Be sure these instructions become the property of and
are reviewed by all future users of this replace to en-
courage proper operation and maintenance.
4. All the parts used with this replace system must be
installed in accordance with these installation instruc-
tions. Failure to do so may be hazardous and will void
the warranty.
5. This replace and accessories should not be altered
in any way that is not specically recommended in this
manual.
6. Refer to your local building code for local requirements
pertaining to installation of factory-built replaces.
These replaces are intended for installation and use
according to standard NFPA NO.11 of the National
Fire Protection Association.
7. This replace must not be installed with a masonry
ue.
8. This replace and chimney should not be used for
venting a wood or coal burning heater or replace in-
sert.
WARNING: Do not install a separate solid fuel insert
or gas replace insert into this replace and chimney
system without written authorization.
9. WARNING: Do not pack required air spaces with
combustible material or insulation not specically rec-
ommended for use in such areas.
Improper Installation
Improper installation or use of this replace will void the warranty and can cause:
1. Damage to the replace from overheating.
. Hazardous temperatures to develop on combustible materials adjacent to the replace
or chimney.
3. The emission of smoke, sparks or hazardous gases into the dwelling.
4. Leakage of rain water into the dwelling.
Intended Product Usage
The replace is designed to sit directly on a combustible
oor. The replace must be installed with zero clearance
to combustible building materials at the side and top
spacers. Only parts manufactured by MHSC and labeled
for use with the replace should be used in the installa-
tion of this replace except for special roof ashings that
may be fabricated locally. The use of improper parts in
the installation can be hazardous and voids the warranty
offered by MHSC.
This replace is designed to burn wood. This replace
is not designed to burn coal, unplumbed liquid fuels, un-
plumbed gaseous fuels or household refuse. Any attempt
to burn these fuels in the replace can be hazardous.
This replace is not designed for installation in a manu-
factured home without a vented attic space. In a vented
manufactured home, an MT16 ceiling thimble, glass doors
and an AK6 outside air kit must be used.
WARNING: This replace and chimney must not be used
for venting a solid fuel heater or replace insert unless
written authorization is given by MHSC. Failure to heed
this warning may cause a re hazard and will void the
warranty.
This replace is intended for supplemental heating only
and is not intended for use as a primary heating system.
Use solid wood, plumbed propane (LP) or Natural
Gas fuel only.
Do not use a replace insert or other product not
specied for use with this replace.
Fireplace also for use in mobile homes with solid fuel
only.
WARNING
!
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
Loading ...
Loading ...
Loading ...