Loading ...
Loading ...
Loading ...
o The chargerunit pluggedintothe
AC outletwill normallybecome
warm to touch during charging.
o SAFE CHARGE - The charger util-
izes trickle charging, which is the
safest way to charge a battery. The
unit will not overcharge and can be
left on charge indefinitely.
o NI-MH Green Power-The Clipper
utilizes Nickel Metal Hydride batter-
ies. They are environmentally safe
and do not have a memory effect.
o Longest life and best performance
wilt be obtained when charging in
normal room temperature.
o Battery life is dependent on usage,
storage temperature and time
To Operate The Combo Clipper:
1 To turn tool ON slide the safety
switch on top of the handle FOR-
WARD with your thumb. Hold it
FORWARD momentarily, while
squeezing the trigger switch (located
under the handle) See Figure 1
Figure 1.
2.. The trigger has been designed so it
is easy to hold in the ON position
during clipping. The safety switch
may be released after the trigger
switch is ON.
3. To turn tool OFF, merely release the
trigger. The locking button ,will snap
backward and prevent the trigger
switch from being accidentally de-
pressed..
To Change Blades:
!_ Make sure to keep your hands away
from the trigger and safety switch to
ensure the tool is not accidentally
turned ON.. Keep hands away from
the sharp edges on the blades.
4
2. Place the Combo Ctipper on a flat
surface,
3 Grip the rear of the handle with one
hand, while gripping the black re-
lease buttons (on each side of the
unit) with the thumb and index fin-
ger of the other hand, See Figure 2.
4, Squeeze in and pull the release
buttons FORWARD and lift the tool
upward to disengage it from the
blade and gearbox, See Figure 2,
Figure 2.
5 With the release buttons FOR-
WARD and the other blade assem-
bly on a flat surface, place the unit
on top of the black gearbox and
gently lower it into place.
6.. When the blade assembly is se-
curely in place push the two re-
lease buttons BACKWARD to lock
the blade in place..
TRIM MING TECHNIQUES
Maintain proper balance at all times.
Keep hand away from blades, Wear
eye protection when using the unit,
Hold the clipper firmly and turn ON.
GRASS SHEAR
o The shear works best with dry grass,
but it can be used safely in wet
grass due to the low voltage design
• A long sweeping cutting motion will
get the greatest amount of clipping
per charge_
o Feed blade into grass at a rate that
allows it to keep up cutting speed..
Feed slower if blades slow down,
• DO NOT force blade Mto the ground.
It is designed for clipping grass,
weeds, dry flowers and new shrub
growth, tt is not designed for edging.
Loading ...
Loading ...
Loading ...