Loading ...
Loading ...
Loading ...
INSTALLATION 19
Reversing Door Opening Direcfion
' _ NOTE -_
To assist in the installation of the handle
on the right side, place a piece of
masking tape near the top of the handle
before removing it.
The appearance of the handle may
Assemble the mounting fasteners D at
both ends of the handle using a 1/4in.
Allen wrench.
Place the handle on the door by fitting
the handle footprints over the mounting
fasteners and tightening the set screws
with a s/s2in. Allen wrench.
Reversing fhe Refrigerafor Handle
Loosen the set screws D with a s/s2in.
Allen wrench and remove the handle.
Loosen the mounting fasteners _ that
connect to the refrigerator door and handle
using a/4 in. Allen wrench, and remove
the mounting fasteners.
Carefully loosen the ptug buttons Q
with your fingers. The buttons can be
unscrewed with the fingers by rotating
them counter-clockwise and continuing
until they loosen and fall out The buttons
were installed without pressure, and for
this reason, they can be unscrewed using
your index finger, thumb or both. Install
the plug buttons Q on the left side.
Loading ...
Loading ...
Loading ...