Loading ...
Loading ...
Loading ...
14 INSTALLATION
Removing/Assembling fhe
Freezer Drawer Handle
(On Freezer Drawer Models)
Removing "the Handle
1 Loosen the set screws 0 located on the
lower side of the handle with a/s in. Atlen
wrench and remove the handle.
Loosen the mounting fasteners _ that
connect to the __-_
freezer drawer
and handle
using a/4 in.
Allen wrench,
and remove
the mounting
fasteners.
Assembling "the Handle
1 Assemble the mounting fasteners I! at
both ends of the handle using a 1/4in. Atlen
wrench.
Place the handle on the door by fitting
the handle
footprints over
the mounting
fasteners and
tightening the
set screws
with a/s in.
Allen wrench.
FZ_ WARNING
When assembling or disassembling the
handles:
* Grasp the handle tightly to avoid dropping it.
* Do not swing the handle into nearby people
or animals.
* Make sure that the bracket hole of the
handle fits properly into the stopper bolt of
the door. Assemble the set screws to fix
the handle into place.
* Make sure that there is not a gap between
the door and handle after assembling the
handle.
Removing/Assembling fhe
Doors and Drawers
When it is necessary to move the refrigerator
through a narrow opening, removing the doors
is the recommended procedure,
._//_ WARNING -._
• If your entrance door is tee narrow for the
refrigerator to pass through, remove the
refrigerator doors and move the refrigerator
sideways through the doorway.
• Use two or more people to remove and
install the refrigerator doors. Failure to do
so can result in back or other injury.
• Disconnect the electrical supply to the
refrigerator before installation. Failure to do
so could result in serious injury or death.
• Do not put hands, feet or other objects into
the air vents or bottom of the refrigerator.
You may be injured or receive an electrical
shock.
• Be careful when handling the hinge and
stopper. You may be injured.
• Remove food and bins before detaching the
doors and drawers.
Loading ...
Loading ...
Loading ...