Loading ...
Loading ...
Loading ...
Tasman Models
With Plastic Handles
1. There are 3 screws on the PC door
and two on the FC door that hold
on the Tasman handles.
2. Remove cap-covering screws and
remove screws, as shown below
3. Remove handle
Curved Door Models
1. Remove door end cap to expose the
door handle plate.
2. Remove screw which holds handle
bracket as shown in Photo A
3. Remove plate, (Photo B) pull handle
away from door.
4. Pull bottom of handle from door.
Photo A
Photo B
Flat door models
Designer
1. Remove small screw from underneath of
the handle. (Refer Photo C)
2. Use a 2.75mm Allen Key.
3. Once screws have been removed handle
bosses can be removed from the door.
Flat doors
Elegance
Note: The designer 2 Handle has a large handle
end therefore uses a larger grub screw.
1. Using a 2.75mm Allen key remove the grub
screw (refer Photo D) from the underneath
of the handles.
2. Remove the handles.
3. Remove handle bosses.
Inox
Photo C
How To Remove Refrigeration Handles
Designer 2 Handles
Photo D
7
Loading ...
Loading ...
Loading ...