Loading ...
Loading ...
Loading ...
1 Prepare Refrigerator for Installation
a) Check that the internal cupboard dimensions are correct (see page 3)
Unpack refrigerator protecting the floor and/or paint work from damage.
b) Check that refrigerator door is hinged on desired side. Refer to use & care booklet for
instructions to change hinge side.
Remove the door handles on models 635, 680 & 790.
Fit the door end cap blank to the corner of the door. Fit small plugs to the screw holes left
when the door handle was removed.
Using screw B, attach spacers to the side of the built in cabinet on the side without hinges.
They should be positioned approximately 100mm (4") from the top front, 150mm (6") from
the front edge, and 75mm (3") rear corners of the refrigerator cabinet. These spacers along
with the foot integration bracket maintain an even gap of 20mm (
3
/4") between the cupboard
and the refrigerator side.
100mm
(4")
Diagram 4
6
150mm
(6")
75mm
(3")
Loading ...
Loading ...
Loading ...