Falmec F5RM90B1-EW2010 90cm Roma Canopy Rangehood with Motor

by-products and to ensure that back draft of

external gases doesn’t take place.

Please ensure the motor is positioned away from

other exhausts such as replace chimneys, gas

fuses, etc. The inline unit can be mounted so that it

ducts directly through the wall or eave

STEP 1:

Establish a suitable position in the roof or wall cavity for the In-Roof motor unit, ensuring that the distance between the Roof

motor unit and the outside vent is under 800 mm. The In-Roof motor unit must be located a minimum of 3 metres from the

hood unit.

STEP 2:

Using the mounting bracket and screws, mount the In-roof motor unit to a beam, truss or another appropriate structures in the

STEP 4:

Attach the Flexi Duct from the external vent to the outlet of the In-roof motor unit using duct clamps. To minimise inefficiencies

and noise ensure the duct is pulled tight.

STEP 5:

Attach Flexi Duct from the In-roof motor unit to the rangehood using duct clamps. Ensure that the duct is pulled tightly to

ensure that FlexiDuct remains firm and stable during operation. Avoid sharp bends in the duct. Gentle bends in the ducting are

recommended as it assists in muffling noise from the fan unit back to the rangehood. If the FlexiDuct needs to be extended

attach the two FlexiDuct ends using a RigidDuct insert, secured by pipe clips product tape.

STEP 6:

Attach the male plug of the In-roof motor unit to the female plug of the rangehood to enable power supply to the fan motor unit.